CORE One L Satin Powder-coated Print Sheet

OVERVIEW:

The Satin sheet further expands our line-up of print sheets. In terms of printing properties, the Satin sheet sits between the smooth and textured variants. Its powder-coated surface with lightly textured matte finish offers an optimal level of adhesion, especially when printing PLA and PETG materials. It is fully compatible with a wide range of common and less-common filaments, such as ABS, ASA, FlexFill 98A, Polycarbonate and more. A vast majority of materials can be printed without a separation layer (e.g. glue).

Polycarbonate - prints better on satin (compared to smooth and textured sheets) - when printing with PC often, glue stick layer is recommended to prevent possible damage to the sheet.

Find more details about the spring steel sheets in our knowledgebase.

WARNING

Never clean the Satin powder-coated spring steel sheet with acetone! Doing so will create microfractures in the texture, which will make the surface deteriorate over time. Learn more about printing on the Satin powder-coated steel sheet in our knowledge base.

Note:

Consumable parts, such as PEI sheets (smooth, textured, etc.) are not covered by warranty as the coatings are designed to diminish over time unless failure has occurred due to a defect in materials or workmanship. Cosmetic damage, including but not limited to scratches, dents, cracks or other cosmetic damage is also not covered by the warranty. Only defective sheets on arrival are covered by warranty.

ATTRIBUTES

• Suitable for both PLA and PETG - Acetone causes the surface to quickly deteriorate
• Lightly textured surface finish - Prints from ASA, PC Blend require a brim / skirt / shield around the print
• No need for glue stick for PETG - DO NOT use sharp metal objects (e.g. a spatula) to remove the print!
• Wide range of supported filaments, including advanced materials, for instance PC Blend
• Easy maintenance and good adhesion qualities